Money Savings Tips From A Plumbing Contractor At Stewart Plumbing
Posted on November 14, 2016 by admin in Plumbing
A plumbing contractor can lead you down the right path in ensuring you save money on water bills. The average homeowner uses 100 gallons of water per day, which may be a higher average than you think. In fact, homeowners don’t really consider just how much water it costs to wash dishes by hand or wash clothes that aren’t even dirty. It’s that lack of attention that leaves them paying more on bills than they expected or wanted. If you live with a growing family, this may apply to you, especially when your home’s fixtures need to meet a wider range of plumbing needs. Even if you don’t, essential fixtures like toilets and showers can cost you more gallons of water than you’d expect, especially when you already use them several times a day. Making matters even more complicated is that you simply cannot live in your home without running water. It is an absolute necessity. With that in mind, you may be asking yourself, “So, how do I manage to save money?” Well, the answer to that question may easier than you think. Sometimes all it takes is a few simple actions to change your plumbing system’s efficiency for the better, and you should call your local contractor to learn how to do it.
Calling Stewart Plumbing for High-Quality Service
If you want to improve your home’s plumbing system, please call Stewart Plumbing for high-quality service. As far as we’re concerned, a little bit more knowledge on your plumbing system can go a long in saving you money, so don’t hesitate to speak to a licensed, experienced plumbing contractor from Stewart Plumbing about your plumbing problems. They have the skills and experience necessary to provide insight into your plumbing system, ensuring you know how to avoid common mistakes homeowners make on a regular basis and instead establish high efficiency in your home. You should also talk with our plumbers about upgrading plumbing fixtures throughout your home, so you receive the most water-efficient plumbing possible. Just by making a few upgrades you can save 30% more on bills, while also being more likely to avoid further spending on plumbing repair due to greater fixture efficiency and longer system lifespan. Simply put, if you want to ensure greater comfort in your home, you should always make us your first choice for service.
7 Plumbing Maintenance Tips From Our Plumbing Contractor
Here are 7 helpful tips that will ensure higher costs on water bills are crossed off your list of worries during the fall and winter:
- Save Money on Bathroom Fixtures: Since you already use 41 gallons of water a day on bathroom fixtures, you can reduce that amount by upgrading bathroom fixtures to more efficient toilets, shower heads, and faucets. Though something like a toilet installation will have an upfront cost, you will notice greater water and cost-efficiency over time. You will also save money by shortening shower time down to 5 minutes or less.
- Upgrade Dishwashers: You can also save money by upgrading dishwashers, which will save you more than 30% compared to your older, current model and 80% compared to washing dishes by hand. If you have no choice but to wash dishes by hand, however, do not allow the water to run.
- Upgrade Washing Machines: You can upgrade washing machines to save 50% more water compared to your current model. You should also avoid washing clothes that aren’t dirty, wear clothes more than once, and reuse towels more than once to save water.
- Invest in Radiant Heating Systems: Newer radiant heating systems use less water and save money on bills since they can recirculate water back into your home. Since they also lose less heat through ducts and windows, they tend to be more efficient compared to baseboard heaters.
- Consider Reusing Storm Water: This may sound odd at first, but you may want to consider a rain storm your next big way to save water. You can reuse storm water for your own purposes by collecting it with a rooftop drum.
- Consider Reusing Greywater: Your water supply in general should be recycled from daily water usage, including any water from showers, faucets, and water from your laundry. You should invest in a sanitary pipe, keeping the water separated from city potable water pipes and running it to your toilet. This method will save you 7,000 gallons of city-supplied potable water per year.
- Save Water While Taking Care of Your Lawn: If you love taking care of your lawn, you need to know 55% of your water is used outdoors, which may be more than you realize. You can lower that percentage by installing a more efficient drip system that waters the base of the plants instead of simply dousing it. Your sprinkler system will cause water to evaporate or blow away, but you can also prevent this by investing in low-maintenance landscaping.
If You Want To Save Money On Your Water Bill, Call And Talk To A Plumbing Contractor Today
Contact Stewart Plumbing today if you want to avoid high costs on water bills thanks to our plumbing contractor!